Heavy duty self vulcanising duct sealing tapes made of an elastomeric modified butyl rubber adhesive. Provides a strong and excellent airtight seal
The Rubber Mounts AG35 and AG45 are rubber-metal vibration absorbers, especially indicated for elastic support of airconditioning units and small
Alutex is lightweight, flexible, non-insulated duct designed for the installation into the existing and new ventilation systems. It is made of
In order to isolate vibrations caused by air handling units and fans connected to air ducts, it is highly recommended to install a flexible duct
The ATR is a glass fibre reinforced aluminium tape appropriate for high needs for insulation operations and air conditioning systems.
Galvanized steel pressed and seam welded bends 15°. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel segmented bends 15°, with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 15°, with rubber sealing. Radius r = 1 x D. The airthightness class is also determined by the
Galvanized steel pressed and seam welded bends 30°. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel segmented bends 30°, with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 30°, with rubber sealing. Radius r = 1 x D. The airthightness class is also determined by the
Galvanized steel segmented bends 60°, with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 45°, with rubber sealing. Radius r = 1 x D. The airthightness class is also determined by the
Galvanized steel segmented bends 45°, with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel segmented bends 45° with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 60°. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 60°, with rubber sealing. Radius r = 1 x D. The airthightness class is also determined by the
Galvanized steel pressed and seam welded bends 90°. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel segmented bends 90°, with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 90°, with rubber sealing. The airthightness class is also determined by the mounting on the
Galvanized steel segmented bends 90° with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Ideal for lap sealing foil faced insulation materials, metal and duct sealing and other general purpose applications. They are used to complete the
BCM is a sealant glue with no fire resistance.
The Circular Flange System (BCT) is providing a higher stability to the circular ducting networks, thanks to rigid connections of the ducts. This
Stable, fast and cheap system to support ducts, pipes and any other part of the installation.
The access doors for round ducting (CAD) consist of two panels connected between themselves with two screws, springs and knobs. The inner panel will
The access doors for round ducting (CAD-SS) consist of two panels connected between themselves with two screws, springs and knobs. The inner panel
The CBR fastening band allows to create a custom made fastening clamp. The band is supplied in a dispenser with markings for easy and efficient cuts
The CDF weldfasteners consist of a steel shank firmly crimped on a steel washer head. It allows the fixing of insulation material on sheet metal
The Antivibration rubber mats are made in Natural Rubber. They range from 45 to 60° Sh. A and can withstand loads from 50 to 12 000 kg. Ideal for
The CLD locking device is specially designed to fit the CBR band. Thanks to it’s locking device with tilting housing and screw, it is easy to adjust
The CTKN beam clamps are made to secure threaded rods without drilling or welding onto beams.
The DobyGrip wire suspension system is used to suspend static loads. In short, it’s the perfect alternative to traditional methods such as threaded
Its use on all connections will increase significantly the air tightness of the ventilation ducting systems. Polyethylene coated textile fabric,
Galvanized steel end cap with rubber sealing for accessories.
The access doors for rectangular ducting (FAD) consist of two panels connected between themselves with two screws, springs and knobs. The inner
The stainless steel access doors for rectangular ducting (FAD-SS) consist of two panels connected between themselves with two screws, springs and
Galvanized steel pressed symmetrical branches 90°. The airthightness class is also determined by the mounting on the construction site.
The FBM hose clamps consist of a continuous serrated banding with rounded edges. The tightening device consist of a tilting housing and screw. This
Connecting collars which facilitate the installation and removal of in-lines fans for service and cleaning. Made from galvanised sheet steel and
Indipendent modular ground support for oudoor units and VRV/VRF systems. Modular structure. Quick to install. Reduces the vibrations to
Perforated bands are designed for suspension of ventilation ducts, pipes and other equipments. Easy to fold and cut, GPB is a quick and competitive
The GT-PE gasket foam tapes are designed to ensure air tightness between a wide variety of elements in duct work systems (between ducts, joining
Corners to be fixed on duct profiles in galvanized steel